Tutorial Tuesday: Making a Draw-string Baggie!

Good evening everyone!

Today' tutorial is a brief walk through of how to make a draw-string baggie! I just learned it in my sewing class today (it's the 2nd class, so I'm not very advanced). It's super cute and easy to make, even if you don't have a sewing machine.

I didn't feel comfortable recording video during class, so I don't have any video footage to show you. So I will just have to talk you through what we did, with the help of some pictures.

On the left is the finished product. You will need a rectangle piece of fabric (long side twice the length of the short side, so a 1:2 ratio), solid color or patterned, it's really up to you. In class we were provided with white fabric and choice of ribbon (I chose green of course!).

If you use a patterned piece of fabric then you won't have to sew decorative stitches across like mine. For white or solid color fabric, and if you have a sewing machine with a variety of stitches, definitely sew some decorative stitches on.

With rectangle piece of fabric, draw a line 3.5 inches from the top of the short side. For horizontal stitching, we marked 3 more lines, below that line, each 1.5 inches down. The markings were made with markers that could easily be wiped off with a damp cloth. There are other markers that fade over time.Then sew the decorative stitches along those lines. You can see some of my decorative stitches on the left.

From this point, you can leave your edges raw, or you can sew some zigzag stitching along the edges to keep them from fraying. I sewed zigzags along all 4 sides of my rectangle piece.

Then fold your rectangle up in half, wrong side out. Sew the two sides down with a straight stitch, leaving the top open.

Next, still with the wrong side out, fold the top opening down to meet the 3.5" line you drew (and/or sewed a decorative stitch). Pin and sew along that edge, then sew another round half an inch away from that towards the opening. This will create the path for your ribbon (observe image on the right).

Turn your bag right side out now, and observe the sides where the stitching is. Between the two lines you made earlier, rip that bit of seam on each side using a seam ripper. This will create one opening on each side for your to slide your ribbon through.

Cut two pieces of ribbon of the same length, and the length should be about 5-6 inches longer than the width of your baggie. If you don't have one of those special sewing gadgets to snake the ribbon through the hole, you can use either a bobby pin (tie the ribbon on the folded part of the pin and use the other end to snake it through) or a long safety pin (pin down one end, close the pin and snake it through).

For the first piece of ribbon, snake it in and out one end, so you make one full circle and come out the same place you came in (observe image on left). Then tie a knot to keep it from slipping out. Next, do the same for the second piece of ribbon but enter and exit from the other hole you created.

That's it! Your baggie is done! If you made it small,it can be a cute little coin bag, travel make-up bag or anything else you can think of. If you make it bigger, there are even more possibilities on the uses!

If you decide to make one, please do share! Until next time!

<3 Kara

Sunday Surprise: Red Riding Hood Costume!

Happy Sunday afternoon everyone!

I'm sorry that today's Sunday Surprise is coming to you so late, but I have been working vigorously all weekend to finish my red hooded cloak for my costume to show you, and I have just finished this afternoon!

 

While I was in Seattle, I saw this super cute dress at TJMax that I had to have because it reminded me of Red Riding Hood for some reason. So I decided to buy it and use it for Halloween, but this dress is so cute I've been wearing it casually :)

After that dress, my quest for an awesome red hooded cloak began. I have a very specific idea of what the cloak should look like. The cloak should be legit, long and with a big over-sized hood. I didn't want the half length cloak made of thin costume material. I wanted this to be semi-heavy, covers all of me if I wanted and flow well, like Red's cloak from Once Upon A Time or Amanda Seyfried's in the 2011 Red Riding Hood film.

I searched online and there are some good and not so good tutorials out there for cloaks. Most of them weren't what I was looking for specifically. And I looked on Etsy, and the cloak that I wanted went for $200 - no way. So on my search I finally found a site that referred me to the Simplicity pattern #5794 that I bought from Joann's for $1. Finally, a pattern that I liked. I chose to make cloak C (which is the green cloak in the bottom right of the Simplicity image). The body turned out great but the hood just was not what I was looking for. So my quest continued, until I found this video on Youtube on how to make a cloak (click on the link if you'd like to see it). The instructions were kind of hard to follow but the little bit that I did understand, I used that to improvise and voila! Although the tutorial was for a knee-length cloak, the hood was exactly what I was looking for: over-sized and slouchy hood :) So I went for it and it turned out fantastically!

The image on the left is the cloak with the original hood from the pattern. I really disliked it, so I took it off and went for the other hood I found at the youtube tutorial I linked above. The image on the right is the complete cloak with the second hood. Although you can't see the new hood on that image, the image below shows the cloak with the second and final hood.

I had so much fun making this! It was a great first major project from scratch on my new sewing machine. I made so many mistakes on this project but I survived and I am so glad I stuck it out. If you have any specific questions about how I made this cloak, leave a comment and I'll be sure to get back to you! Also, since you know that I will be Red for Halloween, I would love it if you shared what you were thinking for your costume :)

I hope you all had a wonderful weekend. See you on Tutorial Tuesday when I take you through the next step in canvas-making. Take care!

<3 Kara

DIY Lace Trimmed Shorts

Good evening y'all!

While visiting Seattle last month, my best friend Elyse and I worked on a sewing project and I wanted to show you what we did!

Many people were pinning and re-pinning these cute lace trimmed shorts and I wanted one so bad! The only problem: I didn't have a sewing machine. But I knew that there was one at Elyse's house, and she was more than happy to help me with this project. We had a blast hanging out, talking and doing crafty things. She helped me with the shorts and also she crocheted these super cute headbands that I will blog about it another post! She is so talented, she could probably make good money selling her stuff. Furthermore, she is so generous for letting me use some of her lace from her stash, the sewing machine and also helping me sew it. I was quite incompetent at the sewing machine (something I plan on fixing) so she had to step in :)

So we started by going to Goodwill to find a pair of jeans to cut up. That day I left Goodwill with an awesome pair of boot cut Banana Republic jeans that fit me perfectly all around. They were even hemmed up to the perfect length for me. After going through Elyse's lace collection together, and choosing potential lace pieces, we agreed to meet another day to sew.

The next meeting, I really didn't have the heart to cut up such a perfect pair of denim. The funny thing was that Elyse mentioned on the first trip to Goodwill, "What if you liked these so much you didn't want to cut them up?" So we made a second trip to Goodwill and felt pretty hopeless when I saw a pair of destroyed Hollister jeans hanging on the discard rack. Those also fit me perfectly and I didn't hesitate cutting off the legs because the knees were too destroyed to my liking.What a lucky day!

Step 1: The lace I decided to use is pictured in the top right. Notice the cute piggies embroidered on it? I was so excited when I noticed it way late. Think about it: who puts piggies on lace trim? So cute! Anyway, the bottom right image shows the Hollister denim that I decided to use. We started by marking the line where we wanted to cut on the leg. I chose it to be just above mid-thigh because I am not a big fan of short-shorts.

Step 2: We turned the shorts inside out and sewed up the hem about half an inch. Elyse started the hem and I tried to finish. The key word here is "try" because I failed miserably. I couldn't keep the hemline straight, so Elyse took over. Isn't she so kind? She actually ended up sewing the rest of it. She doubled sewed the hem to ensure that it was sturdy since this is denim.

Step 3: The finishing step was to sew on the lace along the inside of the denim. We made sure the lace would overlap on the inner thigh so that the lace would be uninterrupted around the rest of the leg.

The finishing of finishing step is to try on the shorts and see how it looks.  And I think it looks pretty cute, don't you? They are so cute I  wore these shorts the rest of that day :)

We went to her backyard to take some pictures for this blog. She also let me use her Buddy scooter for the pictures and they turned out great! Thanks Elyse for helping every step of the way. I had such an amazing time with you ^_^

I hope you enjoyed this post about the process of making these shorts. If you have questions about this process or would like to make a pair for yourself, please let me know! I I would love to see what you came up with. Until next time!

<3 Kara